logo
Service / Catalogue / Motor selection | Back to Homepage   
Adopting a Compact and High Performance Microstep Driver 2-Phase Stepping Motor and Driver
Package RBK Series
2-phase stepping motor and DC input microstep driver in one package. Includes Oriental Motor's proprietary Smooth Drive Function, to easily achieve low-vibration operation.

Product Line

typen_bild
typen_bild
Model Single Shaft/Motor
Frame Size 56.4 mm		 Model Single Shaft/Motor
Frame Size 85 mm
RBK264T RBK266T RBK268T RBK296T RBK299T RBK2913T
Maximum Holding Torque *   N·m 0.48 1.17 1.75 2.2 4.4 6.6
Rated Current   A/Phase 4.2 4.5
Basic Step Angle   1.8º
Power Source   20~75 VDC 4.9 A 20~75 VDC 5.2 A
Degree of Protection **   Motor: IP65 Driver: IP20

* The driver’s automatic current cutback function at motor standstill reduces maximum holding torque by approximately 50%.
** Excluding the gap between the shaft and the flange.

IP65

The motor conforms to the IP65 standard of ingress protection against dust and water.
terminal_box
Complies with international safety standards.

The RBK Series is recognized by UL/CSA standards. CE marking is used in accordance with the low voltage directive.

The RBK Series is compliant with the RoHS Directive, which prohibits the use of six chemical substances, such as lead and cadmium.
The motor can be wired directly from its terminal block.
terminal_box



System Configuration


An example of system configuration with the SG8030JY controller.

- The cable for connecting the motor and driver must be purchased separately.
- The D-Sub (15-pin) connector for connecting to the driver’s CN1 connector is not included. It must be purchased separately.

Accessoires

Flexible Couplings
(Sold serarately),
RoHS-compliant
acc
A flexible coupling ideal for
your motor is available. Once
you have decided on a motor
and gear, you can select the
recommended coupling easily.
All motor shaft diameters
are available.
Mounting Brackets
(Sold separately),
RoHS-conform
acc
Mounting brackets are
convenient for installation
and Securing a stepping motor.
DIN Rail Mounting Plate
(Sold separately),
RoHS-conform
acc
(Available when the input
voltage to the driver is a
maximum of 48 VDC) This
installation plate is
convenient for installing
the driver of RBK Series
on DIN rails with ease.
Controller (Sold separately),
RoHS-compliant

For DIN rail
mounting

For internal
mounting
acc
 
Controller SG8030JY for Stepping Motor
The four touch switches on the front panel enable you to perform
Operations such as data settings. This ensures ease-of-use, and
enables easy connection with few signal lines.

- Jerk Limit Control Function that supresses vibrations while the
  motor is running.
- Operates with progressive Stepp positioning, and enables external
  signal operation
- Maximum oscillating frequency of 200 kHz
- 1-pulse/2-pulse output mode switching
© 2007-2008 ORIENTAL MOTOR (EUROPA) GmbH
Service / Catalogue / Motor selection | Back to Homepage | Top   


Adobe-Homepage